IEC61032 IEC60529 IP3X Test Probe C With Force

IEC61032 IEC60529 IP3X Test Probe C With 3N force

Article NO.:BND-C

Basic Introduction:

1, According to: IEC61032:1997/IEC60529:2001 AND UL

2, IP3X Test Probe C ( Test Probe C) is the necessary tool to proceed protecting electric shock test of domestic and similar electrical appliances.

Technical parameters

1, Test Probe Length :100mm

2, Test Probe Diameter:2.5mm

3, Dam- sphere Diameter:35mm

4, Handle Diameter:10mm

5, Handle Length 100mm

6, According to IEC61032 figure 3 (the Test probe C), table 6

Application:

1, Standard test refers to the joint part can't touch the live parts or close to the hazardous parts, and 35mm circular baffle cannot enter .

2, In the test requirement for preventing from approaching to the hazardous parts, Test Probe C/D need to exert a 3±0.3N or 1±0.1Nforce.

Purpose:

This probe is aiming at verifying the basic protection against approaching to hazardous parts.

Note:For the without force products,please use with the dynamometer.

Test Probe

safety test

ip3x

IEC61032 IEC60529 IP3X Test Probe C With Force Images